What Is a Modified Gross Lease? How It Works, Examples and Tips for Tenants

Small office suite with a reception desk and private offices in a commercial building

A modified gross lease is a commercial lease that sits between a full service gross lease, where the landlord pays all operating costs, and a net lease, where the tenant pays them. In a modified gross lease, the tenant pays a base rent that covers some costs, and the remaining costs are either passed through to the tenant or split by formula. It is one of the most common structures for small office, flex and multi-tenant spaces. Because there is no single standard version, the details in your lease matter more than the label. This guide explains how modified gross leases work, the common ways costs are split and what to check before you sign.

Key Takeaways

How a Modified Gross Lease Works

Industry sources describe the modified gross lease as a common type of commercial lease that occupies the middle ground between a full service gross lease and a net lease. One glossary puts it plainly: “modified gross” is a label for any split between fully gross and fully net, and the lease language, not the name, controls who pays.

In practice, a modified gross lease usually works in one of three ways.

1. Base year

The landlord covers operating costs up to the level of a chosen base year, usually the first year of the lease. In later years, the tenant pays its share of any increase above that base. If costs never rise above the base year, the tenant pays nothing extra.

2. Expense stop

Instead of a base year, the lease sets a fixed dollar limit. Some modified gross leases include an expense stop where the landlord covers expenses up to a set amount, for example $2 per square foot, and costs beyond that fall to the tenant.

3. Itemized split

The lease lists which costs each side pays. For example, the landlord might pay property taxes, building insurance and structural repairs, while the tenant pays its own utilities, janitorial service and interior repairs.

Modified Gross Lease Example

Here is a simple, illustrative base-year example. The numbers are made up to show the method.

In year one you pay only base rent and any costs the lease assigns to you directly, such as suite electricity. In year two you also pay $800 for your share of the increase. Compare this with a triple net lease, where you would pay your full share of all $44,000, not just the increase.

Modified Gross vs Full Service Gross vs Triple Net

FeatureFull service grossModified grossTriple net (NNN)
Operating costsLandlord pays allSplit by lease termsTenant pays its share
Quoted rentHighestIn betweenLowest base rent
PredictabilityHighestModerateLowest
Year-end adjustmentsRarePossibleCommon

For more detail on the two ends of the range, see our guides to gross lease vs net lease and what a triple net lease is.

Multi-tenant small bay industrial building with many roll-up doors and contractor vans parked in front
Multi-tenant buildings often use modified gross leases so each tenant pays its own utilities while sharing building costs.

Pros and Cons for Tenants

Advantages

Disadvantages

What to Check Before You Sign

  1. Get a written cost split. Ask for a table showing which costs the landlord pays and which you pay.
  2. Confirm the base year or expense stop. A base year with unusually low costs means larger increases later.
  3. Ask about occupancy adjustments. If the building was half empty in the base year, some leases “gross up” costs to reflect full occupancy. Understand how this affects you.
  4. Check utilities. Find out whether your unit has its own meters.
  5. Ask about caps. A yearly cap on controllable cost increases adds protection.
  6. Confirm audit rights. Make sure you can review the landlord’s calculations.

Also read our list of the hidden costs of renting commercial property in Texas. This article is general information, not legal advice.

When a Modified Gross Lease Makes Sense

A modified gross lease suits many small businesses that want a reasonable rent without taking on the full cost risk of a triple net lease. It works especially well in multi-tenant buildings where each unit has its own utility meters, such as small office suites and flex space. It is less common in single-tenant buildings, where landlords often prefer a full net lease.

If you are comparing flex units in West Texas, TX Flex Space offers flex warehouse space in Abilene from 2,000 to 6,000 square feet. Ask our team how the lease for a specific unit splits costs.

Frequently Asked Questions

A modified gross lease is a commercial lease in which operating costs are split between landlord and tenant. It sits between a full service gross lease, where the landlord pays all costs, and a net lease, where the tenant pays them.

It depends on the lease. Tenants often pay base rent, their own utilities and interior costs, plus any increase in building operating costs above a base year or expense stop.

A base year is the year whose operating costs serve as a baseline. The landlord covers costs up to that level, and the tenant pays its share of increases in later years.

An expense stop is a fixed dollar amount, usually per square foot, up to which the landlord pays operating costs. Costs above that amount are passed to the tenant.

For many small businesses it is more predictable, because the tenant usually pays only increases or specific costs. A triple net lease may have lower base rent. Compare total annual cost and your tolerance for cost changes.

Final Thoughts

A modified gross lease can give you a fair balance between rent and risk, but only if you understand the split. Get the cost breakdown in writing, check the base year or expense stop, and compare the total annual cost with your other options.

Questions about flex space in Abilene? Contact TX Flex Space or call (510) 203-9490.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *